Limiting Job Separator Output; Setting The Limit For The Ejection Section Of The Built-In Finisher - Kyocera TASKalfa 300i Service Manual

2K5
Maintenance
item No.

Limiting job separator output

U233
Description
Sets a limit of number of output pages from the job separator.
Purpose
Settings may be modified if curled paper is output from the job separator.
Setting
1. Press the start key.
2. Select the mode.
Display
MODE0
MODE1
MODE2
Initial setting: MODE0
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.

Setting the limit for the ejection section of the built-in finisher

U236
Description
If the machine is equipped with an built-in finisher, this mode sets whether A5R/B5R/statement size paper is
output to the machine top tray or not.
Purpose
If the machine is equipped with an built-in finisher and if paper jams occur due to curling of paper in the built-
in ejection section when two-sided copying onto A5R/B5R/statement size paper is performed, this mode is
used to change the setting to ON to disable ejection to the machine top tray.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-58
Description
Description
All sizes: 100 sheets
A3 and Ledger sizes: 70, other sizes: 100
A3 and Ledger sizes: 50, other sizes: 100
Description
Does not eject to the machine top tray.
Eject to the machine top tray.