Interface Block Setting; Usb Host (Usb Memory Slot Setting); Usb Device (Usb Interface Setting); Document Guard Setting - Kyocera TASKalfa 300i Service Manual

2K5

Interface Block Setting

USB Host (USB memory slot setting)

1. Press [Next] of Interface Block Setting and then
[Change] of USB Host.
2. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
3. Press [Block].
4. Press [OK].

USB Device (USB interface setting)

1. Press [Next] of Interface Block Setting and then
[Change] of USB Device.
2. Press [Block].
3. Press [OK].
Optional interface (Optional interface card setting)
1. Press [Next] of Interface Block Setting and then
[Change] of Optional Interface 1 or Optional Inter-
face 2.
2. Press [Block].
3. Press [OK].

Document Guard Setting

1. Press and then [Change] of Document Guard.
2. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
3. Press [Activate].
4. Press [OK].
Optional Functions
Starting Application Use
1. Press [Next] of Optional Function.
2. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
3. Select the desired application and press [Activate].
You can view detailed information on the selected
application by pressing [Detail].
4. In the license key entry screen, press [Official].
Some applications do not require you to enter an
license key. If the license key entry screen does not
appear, go to Step 4.
To use the application as a trial, press [Trial] without
entering the license key.
5. When the confirmation screen appears, press
[Yes].
1-3-106
Checking Application Details
1. Press [Next] of Optional Function.
2. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
3. Select the application you want to check the details
of and press [Detail].
You can now view detailed information on the
selected application.

(14) User Login Administration

Enabling/Disabling User Login Administration
1. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
2. Press [Next] of User Login Setting and then
[Change] of User Login.
3. Select [Local Authentication] or [Network Authenti-
cation]. Select [Off] to disable user login administra-
tion.
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the Authentica-
tion Server. Select [NTLM] or [Kerberos] as the
server type.
4. Press [OK].
Adding a User
1. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
2. Press [Next] of User Login Setting, [Register/Edit]
of Local User List, and then [Add].
3. Press [Change] of User Name.
4. Enter the user name and press [OK].
5. Enter the login user name and E-mail address fol-
lowing 3 and 4 above.
6. Press [Change] of Login Password and then [Pass-
word].
7. Enter the login password and press [OK].
8. Press [Confirm Password].
9. Enter the same login password to confirm and
press [OK].
10. Press [OK].
11. Press [Change] of Access Level.
12. Select the user access privilege and press [OK].
13. Press [Change] of Account Name.
14. Select the account and press [OK].
15. Press [Register] to add a new user on the local user
list.