Kyocera TASKalfa 300i Service Manual page 314

2K5-1
Maintenance
Section
part/location
Optical Contact glass
section
Slit glass
Mirror 1
Mirror 2 and mirror 3
Lens
Reflector
Exposure lamp
Optical rail
Original size sensor
Maintenance
Section
part/location
Transfer/ Transfer roller unit
separation
sections
Separation electrode
Maintenance
Section
part/location
Developing Developing unit
section
Maintenance
Section
part/location
Main charg- Drum unit
ing/drum
section
2-4-4
User call 300K
Clean Clean Clean with alcohol and then a dry cloth.
Clean Clean Clean with a dry cloth (do not clean with a wet
cloth or alcohol).
Clean - Clean with a wet cloth and then a dry cloth
only if black lines appear on the copy image.
Clean - Clean with a wet cloth and then a dry cloth
only if black lines appear on the copy image.
Clean - Clean with a dry cloth only if black lines
appear on the copy image.
Clean - Clean with a dry cloth only if black lines
appear on the copy image.
Check - Replace if an image problem occurs.
Replace
Check - Check noise and shifting and then apply
Grease scanner rail grease EM-50L.
Check - Clean the sensor emitter and sensor receiver
Clean with alcohol or a dry cloth only if there is a
problem.
User call 300K
Check Replace Vacuum or clean with a dry cloth.
Replace after feeding 300,000 sheets.
Check Check Clean with a cleaning brush.
Clean Clean
User call 300K
Check Replace Replace after feeding 300,000 sheets.
Replace
User call 300K
Check Replace Replace after feeding 300,000 sheets.
Replace
Points and cautions
Points and cautions
Points and cautions
Points and cautions
Page
P.1-5-15
Page
P.1-5-36
Page
P.1-5-35
Page
P.1-5-31