Kyocera TASKalfa 300i Service Manual page 35

5. Remove two screws and remove the scan-
ner right cover.
6. Cut out the aperture plate on the upper right
cover using nippers.
7. Pull the key counter wire out.
8. Seat the hook of the key counter cover
retainer in the aperture in the right upper
cover.
9. Fit the key counter cover retainer using two
screws.
Screw
Screw
Figure 1-2-17
Right upper cover
Aperture
Figure 1-2-18
Scanner
right cover
Key counter
wire
Right upper
cover
Aperture
Key counter
cover retainer
(302GR03010)
Hook
M4 x 20 screw
(7BB100420H)
M3 x 8 screw
(5MBTPB3008PW++R)
1-2-13
2K5