Checking Motor Operation; Checking Switches For Paper Conveying - Kyocera TASKalfa 300i Service Manual

2K5
Maintenance
item No.

Checking motor operation

U030
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Display
MAIN
FEED
EJECT(FW)
EJECT(REV)
DRUM
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Checking switches for paper conveying

U031
Description
Displays the on-off status of each paper detection switch on the paper path.
Purpose
To check if the switches for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch on and off manually to check the status.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Display
FEED1
FEED2
FEED3
MP TRAY
REGIST
EJECT
BRANCH
DUPLEX
JOB SEPARATOR
*: Optional.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-20
Description
Operation
Main motor (MM) is turned ON
Paper feed motor (PFM) is turned ON
Eject motor (EM) is turned on clockwise
Eject motor (EM) is turned on counterclockwise
Drum motor (DRM) is turned ON
Switches
Feed switch 1 (FSW1)
Feed switch 2 (FSW2)
Feed switch 3 (FSW3)
MP feed switch (MPFSW)
Registration switch (RSW)
Eject switch (ESW)
Feedshift switch (FSSW)
Duplex paper conveying switch (DUPPCSW)
Job separator eject switch (JESW)*