Security Level; Interface Block Setting - Kyocera TASKalfa 2552ci Operation Manual

Setup and Registration (System Menu) > System Menu

Security Level

[System Menu/Counter] key > [System/Network] > [Security Level]
Item
Security Level

Interface Block Setting

[System Menu/Counter] key > [System/Network] > [Interface Block Setting]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item
USB Host
USB Device
USB Storage
Optional Interface 1
Optional Interface 2
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting
normally.
Very High: In addition to [High] setting, this setting disables the machine
settings to be changed from external command.
NOTE
This function is available when you have logged in as machine administrator.
Adding a User (Local User List) (page 9-8)
This locks and protects the USB port (USB host).
Value: Unblock, Block
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
This locks and protects the USB memory slot.
Value: Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
This locks and protects the optional interface slots.
Value: Unblock, Block
NOTE
You can set this feature for each slot.
8-63
Description
Description