Field Service Ver. 2.0 Jan. 2008
3.3.10
Shift motor
1. Remove the separator.
See P.5
2. Remove the front cover.
See P.6
3. Remove the route change motor.
See P.10
[3]
[2]
[1]
[1]
[1]
[1]
[2]
A083F2C015DA
[3]
[1]
[4]
A083F2C016DA
[1]
[2]
A083F2C017DA
4. Remove the C-clip [1] and the lever
[2], and remove the route change
guide [3].
5. Remove two wire saddles [1], dis-
connect two connectors [2], and
remove two screws [3]. Pull out the
sensor assy [4] in the direction of the
arrow.
6. Remove six screws [1] and remove
the transport guide/lower [2].
3. Other
11