Konica Minolta bizhub C353 Service Manual page 1130

Field Service Ver. 2.0 Jan. 2008
<A>
<B>
7. Carry out the test copy to see if there is any folding deviation.
If the deviation is not adjusted, repeat the procedure from step 8 to adjust the saddle
section position.
[1]
4583F3C523DA
[1]
[1]
A0D6F3C511DA
6. Mechanical adjustment
• If it is deviated downward <A>, move
the positioning dowels to the left.
• If it is deviated upward <B>, move the
positioning dowels to the right.
NOTE
• The folding line will move along
with the staples.
8. Loosen three set screws [1] on the
saddle section.
45