Field Service Ver. 2.0 Jan. 2008
6.
Mechanical adjustment
6.1
Adjustment of height and inclination
1. Gently move the finisher toward the machine and check for following.
2. If the finisher is not at the same height as the machine, adjust the machine as follows.
1
[2]
[1]
• Is the positioning pin aligned with the
hole in the finisher?
A0D6F3C503DA
• Does the horizontal transport unit run
excessively slantwise?
• Does the clearance at A equal that at
B?
A0D6F3C504DA
3. Remove the finisher from the main
A0D6F3C505DB
6. Mechanical adjustment
body, and remove two screws [1],
and remove two caster covers [2].
41
1