Konica Minolta bizhub C353 Service Manual page 1110

Field Service Ver. 2.0 Jan. 2008
[4]
[3]
[2]
[3]
[1]
[2]
[1]
A0D6F2C556DA
[1]
A0D6F2C557DA
[1]
[2]
A0D6F2C558DA
6. Remove the harness from the har-
ness saddle [1], and disconnect the
connector [2].
7. Remove the harness from the wire
saddle [3], and disconnect two con-
nectors [4].
8. Remove the screw [1], and remove
the claw [3] of harness guide from
the square hole [2] in the base plate.
9. Disconnect two connectors [1], and
remove the harness from the wire
saddle [2].
2. Other
25