Stapler/Folding Drive Unit - Konica Minolta bizhub C353 Service Manual

2. Other
2.3.17

Stapler/folding drive unit

1. Remove the rear cover.
See P.8
[1]
[3]
[2]
[3]
[1]
24
[1]
A0D6F2C553DA
[2]
A0D6F2C554DA
[4]
[5]
[3]
A0D6F2C555DA
Field Service Ver. 2.0 Jan. 2008
NOTE
• When installing, align the edge of
claws of the paper exit belt [1].
2. Open the front door [1], and slightly
pull out the stapler section [2].
3. Remove screw [1], and remove the
interface cable presser [2].
4. Remove the harness from seven
wire saddles [3].
5. Remove the harness from the wire
saddle [4], and disconnect two con-
nectors [5].