Traffic Reports - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The system provides the ability to send data to a PC connected to the UNIVERGE SV8100. The

telephone call traffic data for each extension is captured for use with the Station Message Detail

Recording (SMDR) feature.

Call Traffic

The total of outgoing call frequency, outgoing call duration, incoming call frequency, answer frequency,

incoming call duration, ringing duration for each line and extension, and abandon call frequency for each

line is logged. The total of incoming calls, answer frequency, call duration for each line and extension, and

abandon call frequency of each line is logged and the data is outputted to the PC. The system totals the

hour, day, week, and month for each terminal and trunk number. This information is used by the SMDR

feature. The extension which is totaled is determined by system programming. The system outputs this

data to the PC for the total period.

The SMDR call buffer stores 500 calls. The buffer stores calls when the SMDR device is

unavailable. When the buffer fills, the oldest record is deleted to allow the new record to be

If connected to the output device, the reports print hourly. If not connected and the data is not

output at the end of the hour, the traffic data is overwritten by new incoming data.

The traffic data is lost if power failure occurs.

Traffic Reports require connection to the serial connector on the CD-CP00-AU. Additional

programming and a customer-provided printer are also required. Refer to the UNIVERGE

SV8100 System Hardware Manual for more on setting up and connecting to the UNIVERGE

SV8100 system.

SMDR provides additional information about the system trunk calling patterns. Refer to

Station Message Detail Recording on page 2-977

Default Setting

SV8100 Features and Specifications Manual

Traffic Reports

for more information.

Show Quick Links

Table of Contents