Trunk Groups - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Trunk Groups let you optimize trunk usage for incoming and outgoing calls. Each group can be accessed

by an Access Code plus the group number. There are 100 available Trunk Groups and you set the access

order in trunk group programming. Using Call Appearance (CAP) Keys give an extension user more

available function keys, since the user does not need a separate line key for each trunk.

Like Trunk Group Routing, Trunk Groups help you minimize the expense of toll calls. For example, if your

system has outbound WATS lines, OCC lines and DDD lines, program the trunk group to route to the

WATS lines first.

Unless a user preselects a trunk, Trunk Group programming selects the trunk Speed Dialing

used for trunk calls.

If a user dials a number that is not programmed in ARS, the system can route the call to a

trunk group.

All DID trunks of the same type should be placed in the same trunk group. These trunk

groups must then be assigned to a DID Translation Table.

Trunks ring extensions according to Ring Group programming.

Default Setting

All trunks are in group 1.

SV8100 Features and Specifications Manual

Type of Trunk

Trunk Groups

Show Quick Links

Table of Contents