Host Interface Menu - Printronix ProLine 5 Series Manual

HOST INTERFACE Menu

HOST INTERFACE
(From 4–13)
Twinax
Available with
CT option
Dataproducts
See page 4–102
The Host Interface Menu enables you to select and configure one of seven types
of interface between the printer and your host computer. The currently selected
interface is indicated with an asterisk on the control panel message display. Each
interface has its own submenu, with the set of associated interface parameters
that you may configure.
When changing switching between Twinax, Coax, or Auto
IMPORTANT
Switching, the printer will load the saved configuration.
!
Thus, any setting performed before selection for those
interfaces and not saved will be lost.
Configuration Menus
* = Factory default
Auto Switching
Coax
Available with
See page 4–98
CT option
Serial IEEE 1284
See page 4–104 See page 4–110
Centronics*
See page 4–100
1
Ethernet
See page 4–111
1
Available when an Ethernet Adapter is present.
4–97