Steering Gear To Power Steering Fluid Reservoir Return Line - Ford 2007 WQ Fiesta Repair Manual

21 1 -02-34
Power Steering
2 1 1 -02-34
REMOVAL AND INSTALLATION
7. Remove the front axle crossmember
retaining bolts on both sides.
8. Lower the front axle crossmember
approximately I 0 0 mm.
Disconnect the power steering lines from the
steering gear valve body.
1
.
Remove the power steering lines clamp plate
retaining bolt.
2. Rotate the power steering lines clamp plate.
Allow the power steering fluid to drain into a
container.
9. Detach the steering gear to power steering
fluid reservoir return line from the power
steering pump to steering gear pressure line.
2. Remove and discard the power steering lines
O-ring seals.
Item 6
steering gear to power steering fluid
reservoir return line
&AUTION:C~~ the steering gear valve
body inlet port and outlet port to prevent
fluid loss or dirt ingress.
Installation Details
- - ----
2006.0 Fiesta
12/2006 G458167en