Power Steering Pump-1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), Vehicles Without: Air Conditioning (13 434 0) - Ford 2007 WQ Fiesta Repair Manual

21 1-02-8 Power Steering 21 1-02-8
REMOVAL AND INSTALLATION
Power Steering Pump
-
1.25L Duratec-I 6V (Sigma)/l.4L
Duratec-16V (Sigma)/l.GL Duratec-16V (Sigma), Vehicles
(
Without: Air Conditioning(l3 434 0)
Expander, Teflon Seal
211-188 (13-015)
Allow the fluid to drain into a suitable
container.
6 2 2
3. Using the special tool, disconnect the power
Wrench, Hydraulic Line Union
"-269
(13-027)
Removal
Removerllnstaller, Hose
I . Remove the accessory drive belt.
steering fluid supply hose from the power
steering pump.
For additional information, refer to:
Accessory Drive Belt
-
1.4L Duratec-I 6V
(Sigma)ll .6L Duratec-1 6V (Sigma), Vehicles
Without: Air Conditioning (303-05
Accessory Drive, Removal and Installation).
2. Disconnect the power steering fluid reservoir
return hose quick release coupling, from
either the power steering fluid cooler or the
Allow the fluid to drain into a suitable
container.
I
,
4m
ACAUTION:D~
not disconnect the power
steering pump pressure adapter from the
power steering pump.
power steering reservoir return hose.
Using the special tool, disconnect the power
1. Press the power steering fluid reservoir return
steering line from the power steering pump
hose quick release coupling locking tangs.
pressure adapter.
2. Disconnect the power steering fluid reservoir
Allow the fluid to drain into a suitable
return hose quick release coupling.
container.
2006.0 Fiesta
1212006
~ 3 9 7 0 3 1 en