Ford 2007 WQ Fiesta Repair Manual page 451

303-00-29 Engine System
-
General Information 303-00-29
DIAGNOSIS AND TESTING
3. Remove the oil pressure switch.
(
4. Attach the oil pressure gauge with the oil
pressure gauge connector to the oil pressure
switch bore, and position it to allow reading from
above.
5. Lower the vehicle.
7. Raise and support the vehicle. REFER to:
(1 00-02 Jacking and Lifting)
Jacking (Description and Operation),
Lifting (Description and Operation).
8. Detach the oil pressure gauge and connector
from the oil pressure switch bore.
9. Coat the oil pressure switch with sealant
adhesive.
I Q Install the oil pressure switch.
6. N0TE:Measure the oil pressure at an oil
temperature of 80°C.
N0TE:OiI pressure at idle speed (750 rpm): 0.95
bar.
11. Connect the oil pressure switch electrical
N0TE:Oil pressure at 2500 rpm: 2.7 bar.
connector to the oil pressure switch.
Measure the oil pressure.
I2 Lower the vehicle.
2006.0 Fiesta
1212006 GI 52554en