100-04-1 7
Noise, Vibration and Harshness
100-04-17
DIAGNOSIS AND TESTING
TEST CONDITIONS
DETAILSIRESULTSIACTIONS
A2: CHECK THE POWERTRAINIDRIVETRAIN MOUNTS
Carry out the powertrainldrivetrain mount neut-
ralizing procedure
Are the mounts OK?
- +
Yes
Vehicle condition corrected. ROAD TEST as
necessary.
+
No
INSTALL new powertrainldrivetrain mounts
as necessary. ROAD TEST as necessary.
PINPOINT TEST B : TIP-IN MOAN
TEST CONDITIONS
DETAILSIRESU LTSIACTIONS
B1: CHECK THE AIR CLEANER
Check the condition of the air cleaner mounts,
inlet tube, outlet tube, resonators and all other
components associated with the air induction
system for correct installation and tightness of
all connections.
Are the components OK?
+
Yes
GO to B2.
- +
No
REPAIR or INSTALL new components as
necessary. ROAD TEST as necessary.
82: CHECK THE EXHAUST SYSTEM
Carry out the exhaust system neutralizing
procedure.
REFER to: Exhaust System Neutralizing (1 00-
04, General Procedures).
Is the exhaust system OK?
-+
Yes
GO to B3.
+
No
REPAIR as necessary. ROAD TEST as
necessary.
-
-
2006.0 Fiesta
1212006
+
G37349en