204-0 I -8
Front Suspension
204-01 -8
REMOVAL AND INSTALLATION
Install the heat shield.
2. Tighten the bolts.
7. Check the toe setting and adjust as
4m
ACAUTION:T~~
lower arm pinch bolt must
necessary. For additional information, refer
be installed from the rear of the wheel
to Section 204-00 [Suspension System
-
knuckle.
General Information].
Attach the lower arm ball joint to the wheel
knuckle.
5, Install the wheel and tire. For additional
information, refer to Section 204-04 wheels
and Tires].
6. N0TE:The lower arm to crossmember
retaining bolts must be tightened with the
vehicle weight on the road wheels.
Tighten the lower arm to crossmember
retaining bolts.
1. Tighten the bolt in two stages.
Stage I: 80 Nm.
Stage 2: 55 degrees.
2006.0 Fiesta
1212006
G I 83757en