Lnspection And Verification; Symptom Chart; Pinpoint Tests - Ford 2007 WQ Fiesta Repair Manual

100-00-4 General Information 100=00=4
DESCRIPTION AND OPERATION
lnspection and Verification
Visual lnspection Charts, Symptom Charts and
other information charts (such as diagnostic
routines) or supplement test procedures with
technical specifications will navigate the user to a
specific test procedure.
Symptom Chart
The symptom chart indicates symptoms, sources
and actions to address a condition.
Item
1
2
3
4
5
6
7
8
9
10
Pinpoint Tests
For electrical systems, pinpoint test steps are used
to identify the source of a concern in a logical,
step-by-step manner. pinpoint tests have two
columns: CONDITIONS and
DETAILSIRESULTSIACTIONS.
Designation
Special tool
Install new component
l nspect
Apply sealant
Apply petroleum jelly
Apply oil
Apply fluid
Apply grease
Removal or Disassembly
detail
Installation or Assembly
detail
The CONDITIONS column is used exclusively for
graphics and icons (with or without captions) and
the DETAILSIRESULTSIACTIONS column
provides direction to another test step or specific
corrective actions.
The boxed numbers indicate the order in which the
described action is to be performed.
Description
A special tool is required for this component. There will also
be a removal or installation symbol alongside the special
tool symbol.
Discard the old component and install a new component.
Check the component for damage.
Apply sealant to the component as specified in the mate-
rials table.
Apply petroleum jelly to the component as specified in the
materials table.
Apply oil to the component as specified in the materials table.
Apply fluid to the component as specified in the materials
table.
Apply grease to the component as specified in the mate-rials
table.
Go to the removal or disassembly detail for additional
information to remove or disassemble a component
Go to the installation or assembly detail for additional
information to install or assemble a component
2006.0 Fiesta
1212006
G I 7371 en