Table of Contents
Advertisement
206-02-6
Drum Brake
206-02-6
REMOVAL AND INSTALLATION
Brake Drum(l2 275 0)
Removal
Remove the dust cap.
I . Remove the parking brake control trim panel.
6. Remove the brake drum.
2. Loosen the parking brake cable adjustment
1. Remove and discard the wheel hub retaining
nut to the end of the thread.
nut.
2. Remove the drum.
Discard the retaining clip.
3. Release the parking brake.
Installation
4. Remove the wheel and tire. For additional
1 ~CAUTION:Rotate the drum ten times in
information, refer to Section 204-04 [Wheels
the opposite direction when tightening the
and Tires].
wheel hub retaining nut to prevent damage
5. N0TE:If the dust cap is damaged on removal
to the bearing.
a new dust cap must be installed during
N0TE:lnstall a new wheel hub retaining nut.
installation.
N0TE:lnstall a new parking brake cable retaining
clip.
To install, reverse the removal procedure.
2. Adjust the parking brake cable. For
additional information, refer t o
Section 206-05 [Parking Brake and
Actuation].
Hide quick links:
Advertisement
Table of Contents
