Table of Contents
Advertisement
206-09A-9
Anti-Lock Control
206-09A-9
REMOVAL AND INSTALLATION
6. Disconnect the anti-lock brake system (ABS)
module electrical connector.
11. Detach the HCU and ABS module assembly
from the support bracket.
5. Detach the brake tubes from the bulkhead.
10. Remove the HCU and ABS module
7. Raise and support the vehicle. For additional
information, refer to Section 100-02 [Jacking
12. Remove the HCU to ABS module retaining
and Lifting].
bolts.
/
8. Remove the HCU and ABS module support
bracket lower retaining bolt.
assembly and the support bracket.
9. Lower the vehicle.
13. Remove the HCU.
Installation
1. To install, reverse the removal procedure.
2006.0 Fiesta
1212006
G I 83774en
Hide quick links:
Advertisement
Table of Contents
