Brake Pedal-Rhd (12 333 0); Removal And Installation - Ford 2007 WQ Fiesta Repair Manual

206-06-6 Hydraulic Brake Actuation 206-06-6
REMOVAL AND INSTALLATION
Brake Pedal
-
RHD(12 333 0)
Removal
All vehicles
A
WARNING:ln the event of a frontal impact
to a vehicle equipped with a decoupler
brake pedal in which damage to, or
significant movement of, the instrument
panel or the brake booster has occurred,
a new brake pedal must be installed.
Failure to follow this instruction may result
in personal injury.
1. Remove the instrument panel lower panel.
1. Remove the lower retaining screws.
2. Remove the upper retaining screws from the
stowage compartment.
3. Release the clip.
2. Detach the brake booster actuating rod from
the brake pedal (accelerator pedal shown
removed for clarity).
I. Depress the clip.
2. Remove the brake booster actuating rod pin.
\
Vehicles with manual transaxle
1 .
3. N0TE:From 0212004 the brake pedal will not
be equipped with the brake pedal decoupler
mechanism.
Remove the brake pedal.
1. Remove the pivot shaft nut.
2. Slide out the pedal pivot shaft.
3. Remove the brake pedal.
4. Remove the brake pedal bushings.
(
,:
Vehicles with automatic transaxle
5. N0TE:From 0212004 the brake. pedal will not
be equipped with the brake pedal decoupler
mechanism.
Remove the brake pedal.
1. Remove the pivot shaft nut.
2. Slide out the pedal pivot shaft.
2006.0 Fiesta
1212006 G89190en