Ford 2007 WQ Fiesta Repair Manual page 169

205-04-1 7 Front Drive Halfshafts 205-04-1 7
REMOVAL AND INSTALLATION
1. Use a suitable screwdriver under the CV joint
boot to allow air to escape.
2. Install the CV joint boot housing and pull it
backwards 20 mm.
7. N0TE:lnstall a new CV joint boot retaining
clamp.
N0TE:Make sure that the CV joint boot is clamped
at the measured postion.
Using a special tool, install the CV joint boot
retaining clamp.
8. Install the right-hand halfshaft.
For additional information, refer to Halfshaft
RH in this section.
9. Install the left-hand halfshaft.
For additional information, refer to Halfshaft
LH in this section.
2006.0 Fiesta
1212006 GI 52548en