Rear Wheel Speed Sensor Ring ................................................................... (12 788 0) 206-09A-22 - Ford 2007 WQ Fiesta Repair Manual

206-09A-22 Anti-Lock Control 206-09A-22
REMOVAL AND INSTALLATION
Rear Wheel Speed Sensor Ring(l2 788 0)
Special Tool(s)
I I
Installer, ABS Sensor Ring
I
General Eaui~ment
I
Soft faced hammer
I
Removal
Remove and discard the wheel hub retaining
\.
nut.
Vehicles with rear drum brakes
All vehicles
1. Remove the brake drum. 5. Remove and discard the wheel speed sensor
For additional information, refer to: Brake
ring (brake disc shown).
Drum (206-02 Drum Brake, Removal and
Installation).
Vehicles with rear disc brakes
2. Remove the dust cap.
Installation
All vehicles
1. CAUTIONS:
A M a k e sure the wheel speed sensor ring
3. Remove the brake disc.
is not knocked, damaged and kept free from
For additional information, refer to: Brake
metal fragments.
Disc (206-04 Rear Disc Brake, Removal and
Installation).
A ~ r o t e c t the face of the wheel speed
sensor ring with a non-ferrous flat block to
4. Remove the wheel hub.
prevent damage.
A M a k e sure the wheel hub or brake drum
is adequately supported and do not allow it
to rest on the wheel studs.
f
A M a k e sure the wheel speed sensor ring
''-
'
is pressed on slowly and squarely until fully
seated.
A D O
not exceed a maximum load of 10 kN.
2006.0 Fiesta
1212006
G I 83776en