Steering Column Shaft Universal Joint - Ford 2007 WQ Fiesta Repair Manual

211 -00-1 7
Steering System
-
General Information 21 1 -00-1 7
DIAGNOSIS AND TESTING
11. Install a new driver air bag module wiring
harness to the drive air bag module.
If the movement is not smooth or resistance
is felt, renew the steering column.
REFER to: Driver Air Bag Module Wiring
REFER to: Steering Column (21 1-04 Steering
Harness (501 -20 Supplemental Restraint
Column, Removal and Installation).
System, Removal and lnstallation).
12 Install the driver air bag module.
3. Hold both of the steering column shaft universal
joint yokes and then twist them clockwise and
REFER to: Driver Air Bag Module (501-20
counterclockwise.
Supplemental Restraint System, Removal and
If any movement is felt, install a new steering
installation).
column.
REFER to: Steering Column (21 1-04 Steering
Column, Removal and lnstallation).
Steering Column Shaft Universal Joint
\
la A w A R N I N G : ~ ~ ~ ~ ~ ~ ~ a new steering column
shaft to steering gear pinion retaining bolt.
Failure to follow this instruction may result
in personal injury.
Detach the steering column shaft from the
steering gear pinion.
Discard the steering column shaft to steering
gear pinion retaining bolt.
2. Check for smooth movement of the steering
column shaft universal joint.
1. Hold the steering column shaft universal joint
yoke.
2. Articulate the free yoke in a figure of eight
movement.
2006.0 Fiesta
1212006
G I 49906en