Inner Constant Velocity (Cv) Joint Boot (L4 336 0) - Ford 2007 WQ Fiesta Repair Manual

205-04-1 5 Front Drive Halfshafts 205-04-1 5
REMOVAL AND INSTALLATION
Inner Constant Velocity (CV) Joint Boot(l4 336 0)
Special Tool(s)
I I
Clamping Tool, Boot
I
Remover, BearingIGear
205-3 1 0 ( 1 5-09 1
A ~ s e vise jaw protectors for all operations
in a vise.
N0TE:Secure the halfshaft in a vise.
Detach the inner CV joint housing from the
halfshaft.
1. Remove and discard the CV joint boot
retaining clamps.
2.
Remove the CV joint housing and discard
the grease.
I
I
Installer, Extension Housing
I
BushingIOil Seal
308-046 ( 1 6-0 1 6)
Materials
Name Specification
1
Grease
I
WSS-M
1 C259A1
I
4. Remove and discard the spider circlip.
Removal
5. Using the special tool, remove the spider.
I . Remove the right-hand halfshaft.
For additional information, refer to Halfshaft
RH in this section.
2. Remove the left-hand halfshaft.
For additional information, refer to Halfshaft
LH in this section.
3. CAUTIONS:
A D O
not bent the inner constant velocity
(CV) joint more than 18 degrees and the outer
CV joint more than 45 degrees.
2006.0 Fiesta
1212006 GI 52548en