Wheel Cylinder (12 305 0) - Ford 2007 WQ Fiesta Repair Manual

206-02-9 Drum Brake 206-02-9
REMOVAL AND INSTALLATION
Wheel Cylinder(l2
305
0)
\ *
,
General Equipment
2. Bleed the brake system. For additional
Brake hose clamp
information, refer to Section 206-00 [Brake
System
-
General Information].
Removal
A
CAUTI0N:lf brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
1. Remove the brake shoes.
For additional information, refer to Brake
Shoes in this section.
2m
ACAUTION:C~~
the brake tube to prevent
fluid loss or dirt ingress.
Disconnect the brake tube from the wheel
cylinder.
1. Using a suitable brake hose clamp, clamp
the brake hose.
2. Disconnect the brake tube.
3. Remove the wheel cylinder.
Installation
I . To install, reverse the removal procedure.
2006.0 Fiesta
1212006
G I 49888en