Ford 2007 WQ Fiesta Repair Manual page 374

21 1-02-26 Power Steering 21 1-02-26
REMOVAL AND INSTALLATION
Allow the power steering fluid to drain into a
15. Remove and discard the power steering
container. lines O-ring seals.
Installation Details
Item 5
Power steering pump to steering gear
pressure line
3. Attach the steering gear to power steering
fluid reservoir return line to the power
1. Install new power steering lines O-ring seals.
steering pump to steering gear pressure line.
2. Connect the power steering lines to the
4. N0TE:Use the front axle crossmember rear
steering gear valve body.
inner retaining bolts to locate the special
1. Rotate the power steering lines clamp plate.
tool.
2. Install the power steering lines clamp plate
N0TE:Do not fully tighten the front axle
retaining bolt.
crossmember rear inner retaining bolts at this
-
stage.
- - - - - - - - -
2006.0 Fiesta
1212006
G458165en