Table of Contents
Advertisement
206-0619
Hydraulic Brake Actuation
206-0619
REMOVAL AND INSTALLATION
Disconnect the brake tubes from the brake
11. Disconnect the low brake fluid warning
master cylinder.
indicator switch electrical connector.
I
All vehicles
9m &AUTION:C~~ the clutch master cylinder
feed hose to prevent fluid loss or dirt
ingress.
Disconnect the clutch master cylinder feed
hose from the brake fluid reservoir.
12. Remove the brake master cylinder and
brake fluid reservoir assembly.
Installation
A
CAUTI0N:Make sure the brake master
cylinder vacuum seal is correctly
positioned before installation.
I . To install, reverse the removal procedure.
2. Bleed the brake system. For additional
information, refer to Section 206-00 [Brake
System
-
General Information].
10. Detach the brake master cylinder from the
brake booster.
2006.0 Fiesta
1212006
G89191 en
Hide quick links:
Advertisement
Table of Contents
