Table of Contents
Advertisement
204-02-21
Rear Suspension
204-02-21
REMOVAL AND INSTALLATION
4. Using a suitable transmission jack, support
9. Using the special tools, remove and discard
the beam axle.
the trailing arm bushing.
(
5. Remove the beam axle retaining bolts on
both sides.
Installation
6. Lower the beam axle sufficiently to gain
1. N0TE:lnstall a new trailing arm bushing.
access to the trailing arm bushing.
N0TE:Align the mark on the bushing housing with
7. Mark the bushing housing adjacent to the
the locating tang O n the trailing arm bushing.
locating tang on the bushing, to aid
Using the special tools, install the new
installation.
trailing arm bushing.
8. Remove the trailing arm bushing retaining
2. Fabricate a
32
mm high by 60 mm long
nut and bolt.
spacer.
2006.0 Fiesta
1212006
G289770en
Hide quick links:
Advertisement
Table of Contents
