205-04-1 2
Front Drive Halfshafts
205-04-1 2
REMOVAL AND INSTALLATION
N0TE:Do not fully tighten the wheel hub retaining
9. Install the wheel and tire.
nut at this stage.
For additional information, refer to: Wheel
Install the wheel hub retaining nut.
and Tire (204-04 Wheels and Tires, Removal
and Installation).
lorn
&AUTION:U~~ a socket to tighten the
wheel hub retaining nut to prevent damage.
7m & A U T I O N : M ~ ~ ~ sure that the heat shield
is installed to prevent damage to the ball
joint.
Install the heat shield.
*'
&AUTION:T~~
lower arm pinch bolt must
be installed from the rear of the wheel
knuckle.
Attach the lower arm ball joint to the wheel
knuckle.
Tighten the wheel hub retaining nut.
11. Tighten the strut and spring assembly top
mount retaining nuts.
2006.0 Fiesta
1212006
G I I 3105en