Ford 2007 WQ Fiesta Repair Manual page 252

206-05-1 6 Parking Brake and Actuation 206-05-1 6
REMOVAL AND INSTALLATION
Release the locking tangs.
8. Detach the parking brake cables from the
parking brake cable equalizer.
Detach the parking brake cables from the
parking brake cable support bracket.
9. Detach the parking brake cable from the
beam axle bracket on both sides.
10. Detach the parking brake cable from the
floor pan on both sides.
11. Remove the parking brake cable.
Installation
ACAUTION:T~~~
care when installing the
exhaust hanger insulators to prevent
damage.
N0TE:Check the exhaust hanger insulators for
damage. Install new exhaust hanger insulators if
required.
To install, reverse the removal procedure.
2. Adjust the parking brake.
For additional information, refer to: Parking
Brake Cable Adjustment
-
Vehicles With:
Rear Disc Brakes (206-05 Parking Brake
and Actuation, General Procedures).
2006.0 Fiesta
1212006 G458900en