Ford 2007 WQ Fiesta Repair Manual page 311

206-09C-5 Anti-Lock Control
-
Stability Assist 206-096-5
REMOVAL AND INSTALLATION
6. Disconnect the stability assist module
electrical connector. 11. Detach the HCU and stability assist module
assembly from the support bracket.
5. Detach the brake tubes from the bulkhead. 10. Remove the HCU and stability assist
7. Raise and support the vehicle. For additional
information, refer to Section 100-02 [Jacking 12. Remove the HCU to stability assist module
and Lifting]. retaining bolts.
i
8. Remove the HCU and stability assist module
support bracket lower retaining bolt.
module assembly and the support bracket.
9. Lower the vehicle.
13. Remove the HCU.
Installation
I . To install, reverse the removal procedure.
- - - - - - - -
2006.0 Fiesta
1212006 ~ 3 2 7 3 4 1 en