Ford 2007 WQ Fiesta Repair Manual page 377

21 I -02-29 Power Steering 21 1 -02-29
REMOVAL AND INSTALLATION
16. Connect the PSP switch electrical
connector.
2. Locate the special tool onto the power
steering pump to steering gear pressure line
union and install the O-ring seal.
17. Install the front wheels and tires.
3. Connect the power steering pump to steering
For additional information, refer to: Wheel
gear pressure line to the power steering
and Tire (204-04 Wheels and Tires,
Removal and Installation).
Pump.
Item 1
Power steering pump pulley
1. N0TE:This step i s only required if installing
a new power steering pump to steering gear
,
pressure line.
,
Push the new power steering pump to
steering gear pressure line into the new
power steering pump to steering gear
pressure line union until it clips into place.
2m
A C A U T I O N : ~ ~ ~ ~
must be taken to prevent
dirt ingress.
Using the special tool, install a new O-ring
seal onto the power steering pump to
steering gear pressure line union.
1. Push the O-ring seal onto the special tool.
4. Using the special tool, install the power
steering pump pulley.
2006.0 Fiesta
1212006
G458165en