204101 -4
Front Suspension
204-01 -4
DESCRIPTION AND OPERATION
Item
Description
The rear rubber mountings for the lower
suspension arms are enclosed in aluminium
brackets. This provides more vibration damping
than previously. Both the front and rear brackets
are arranged horizontally.
1
The suspension strut turret support bearings have
two separate routes for independently deflecting
the spring and shock absorber forces into the body.
This reduces the level of noise transmitted from
the road surface.
Rear rubber mounting
The correct installation position must be observed
when installing the suspension strut turret support
bearings. This is indicated by an arrow on the
suspension strut turret support bearing. The shock
absorbers are gas shock absorbers.
The spring travel has been increased by 6 mm,
and the track has been increased by 48 mm to
1477 mm.
2006.0 Fiesta
1212006
GI 67080en