Ford 2007 WQ Fiesta Repair Manual page 113

204-01 -1 5 Front Suspension 204-01 -1 5
REMOVAL AND INSTALLATION
Remove the heat shield. Using a suitable three leg puller, detach the
wheel hub from the halfshaft.
11. Remove and discard the wheel hub
retaining nut.
14. Using the special tool, remove the wheel
knuckle.
12. Remove the wheel knuckle to suspension
strut pinch bolt.
Installation
13. N0TE:Support the halfshaft. The inner joint
must not be bent more than 18 degrees.
The outer joint must not be bent more than
45 degrees.
All vehicles
I. Install the wheel knuckle.
2m ~ C A U T I O N : M ~ ~ ~ sure the halfshaft i s
completely installed into the wheel hub.
2006.0 Fiesta
1212006 GI 83759en