Pre-exposure lamp
Pre-transfer lamp
Pre-exposure
lamp
Pre-transfer
lamp
Figure 8-15 Removing the pre-exposure lamp and pre-transfer lamp
1.
Turn off the printer. Remove the imaging unit.
2.
Remove the screw securing the pre-exposure lamp in place.
3.
Disconnect the pre-exposure lamp's wiring harness. Remove the
lamp.
1.
Turn off the printer. Remove the imaging unit.
2.
Remove the E-ring securing the front end of the cleaning cam roller.
Move the front end of the roller out of the way.
3.
Remove the screw securing the pre-transfer lamp in place.
4.
Disconnect the pre-transfer lamp's wiring harness. Remove the lamp.
Cleaning cam
roller
FRU Disassembly/Assembly
9697-19
Service Manual
8
8-23