Lldpmed Port Policy; Lldpmed Coordinates; Lldpmed Datum; Lldpmed Fast - Interlogix IFS NS3601-24P User Manual

: This field shall contain the DSCP value to be used to provide Diffserv node behavior for the specified
<dscp>
application type as defined in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code point
values (0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.

LLDPMED Port Policy

Description:
Set or show LLDP-MED port polcies.
Syntax:
LLDPMED port policies [<port_list>] [<policy_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<policy_list>: List of policies to delete

LLDPMED Coordinates

Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [latitude|longitude|altitude] [north|south|west|east|meters|floor] [coordinate_value]
Parameters:
: Latitude, 0 to 90 degress with max. 4 digits ( Positive numbers are north of the equator and negative
latitude
numbers are south of the equator).
: Longitude,0 to 180 degress with max. 4 digits ( Positive values are East of the prime meridian and
longitude
negative numbers are West of the prime meridian.
: Altitude, Meters or floors with max. 4 digits.
altitude
(default: Show coordinate location configuration)
north|south|west|east|meters|floor:
: North (Valid for latitude)
North
: South (Valid for latitude)
South
: West (Valid for longitude)
West
: East (Valid for longitude)
East
: Meters (Valid for altitude)
Meters
: Floor (Valid for altitude)
Floor
lldpmed Coordinate value
coordinate_value

LLDPMED Datum

Description:
Set or show LLDP-MED Coordinates map datum.
Syntax:
LLDPMED Datum [wgs84|nad83_navd88|nad83_mllw]
Parameters:
wgs84|nad83_navd88|nad83_mllw:
: WGS84
wgs84
nad83_navd88 : NAD83_NAVD88
: NAD83_MLLW
nad83_mllw
lldpmed Coordinate datum

LLDPMED Fast

Description:
Set or show LLDP-MED Fast Start Repeat Count.
Syntax:
: lldpmed Coordinate value
359
User's Manual of NS3601-24P/4S Series