Lan Configuration Command - Interlogix IFS NS3601-24P User Manual

MAC Flush
Description:
Flush all learned entries.
Syntax:
MAC Flush
VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
SWITCH/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType
---- ---- ----------
1 1 Disabled
VID Ports
---- -----
1 1-24
VLAV PVID
Description:
Set or show the port VLAN ID.
Syntax:
VLAN PVID [<port_list>] [<vid>|none]
Parameters:
<port_list>: Port list or 'all', default: All ports
<vid>|none : Port VLAN ID (1-4095) or 'none',
(default: Show port VLAN ID)
Default Setting:
1
Example:
Set PVID2 for port20
SWITCH/>vlan pvid 20 2
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
LinkType Q-in-Q Mode Eth type
---------- -------- -----------
All UnTag
--------
Disable N/A
285