Stp Msti Map; Stp Msti Add; Stp Port Configuration - Interlogix IFS NS3601-24P User Manual

MST4 128
MST5 128
MST6 128
MST7 128
Example:
Set MST1 priority value in 48.
SWITCH/>stp msti priority 1 48

STP MSTI Map

Description:
Show or clear MSTP MSTI VLAN mapping configuration.
Syntax:
STP Msti Map [<msti>] [clear]
Parameters:
<msti>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
Clear : Clear VID to MSTI mapping
Example:
Add MST1 priority value in 48.
SWITCH/>stp msti priority 1 48

STP MSTI Add

Description:
Add a VLAN to a MSTI.
Syntax:
STP Msti Add <msti> <vid>
Parameters:
<msti>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<vid> : VLAN ID (1-4095)
Example:
Add MST1 in vlan1.
SWITCH/>stp msti add 1 1

STP Port Configuration

Description:
Show STP Port configuration.
Syntax:
STP Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
Example:
Show STP status of Port1
SWITCH/>stp port configuration 1
Port Mode AdminEdge AutoEdge
---- -------- -------------------------------
1 Enabled Enabled
restrRole restrTcn
--------------------------
Enabled Disabled Disabled
340
User's Manual of NS3601-24P/4S Series
bpduGuard Point2point
---------------------------------
Disabled Auto