Lan Setting Example - Interlogix IFS NS3601-24P User Manual

VLAN setting example:
- Separate VLAN
- 802.1Q VLAN Trunk
- Port Isolate
Two separate 802.1Q VLAN
The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and VLAN
Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the same VLAN
members. The screen is shown
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follow:
Untagged packet entering VLAN 2
While [PC-1] transmit an untagged packet enters Port-1, the Managed Switch will tag it with a VLAN Tag=2. [PC-2]
1.
and [PC-3] will received the packet through Port-2 and Port-3.
[PC-4],[PC-5] and [PC-6] received no packet.
2.
While the packet leaves Port-2, it will be stripped away it tag becoming an untagged packet.
3.
While the packet leaves Port-3, it will keep as a tagged packet with VLAN Tag=2.
4.
Tagged packet entering VLAN 2
While [PC-3] transmit a tagged packet with VLAN Tag=2 enters Port-3, [PC-1] and [PC-2] will received the packet
5.
through Port-1 and Port-2.
While the packet leaves Port-1 and Port-2, it will be stripped away it tag becoming an untagged packet.
6.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-6-8 appears. Table 4-1
Figure 4-6-8 two separate VLAN diagram
VID Untagged Members
1
2
3
Table 4-1 VLAN and Port Configuration
describes the port configuration of the Managed Switches.
Port-7~Port-24
Port-1,Port-2
Port-4,Port-5
106
Tagged Members
N/A
Port-3
Port-6