(default: Show 802.1X state)
Default Setting:
none
Example:
Show the port 1 security state.
SWITCH/>security network nas state 1
Port Admin State
---- ------------------
1
Force Authorized
Security Network NAS Reauthentication
Description:
Set or show Reauthentication enabledness.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable: Disable reauthentication
(default: Show current reauthentication mode)
Default Setting:
disable
Example:
Enable reauthentication function.
SWITCH/>security network nas reauthentication enable
Security Network NAS ReauthPeriod
Description:
Set or show the period between reauthentications.
Syntax:
Security Network NAS ReauthPeriod [<reauth_period>]
Parameters:
<reauth_period>: Period between reauthentications (1-3600 seconds)
(default: Show current reauthentication period)
Default Setting:
3600
Example:
Set reauthentication period in 3000sec.
SWITCH/>security network nas reauthperiod 3000
Security Network NAS EapolTimeout
Description:
Set or show the time between EAPOL retransmissions.
Syntax:
Security Network NAS EapolTimeout [<eapol_timeout>]
Port State
Last Source
---------------------
-----------------
Link Down
317
User's Manual of NS3601-24P/4S Series
Last ID
------------------
-
-