Arp Inspection Static Table - Interlogix IFS NS3601-24P User Manual

The page includes the following fields:
Object
• Mode of ARP
Inspection
Configuration
• Port Mode
Configuration
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

ARP Inspection Static Table

This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen is shown
The page includes the following fields:
Object
• Delete
• Port
• VLAN ID
• MAC Address
• IP Address
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Description
Enable the Global ARP Inspection or disable the Global ARP Inspection.
ARP Inspection is only enabled on this given port
and Port Mode on a given port are enabled.
Figure 4-12-13 Static ARP Inspection Table screen page screenshot
Description
Check to delete the entry. It will be deleted during the next save.
The logical port for the settings.
The VLAN ID for the settings.
Allowed Source MAC address in ARP request packets.
Allowed Source IP address in ARP request packets.
,
when both Global Mode
220
Figure 4-12-13.