Set Up Tos Precedence Mapping - Interlogix IFS NS3601-24P User Manual

Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.

Set up ToS Precedence Mapping

Set up the traffic class mapping to the precedence part of ToS (3 bits) when receiving IPv4/IPv6 packets. The Set up ToS
Precedence Mapping screen is shown
The page includes the following fields:
Object
•
QCL ID
•
ToS Precedence Class
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
The QCL configuration wizard is finished, and the new configuration is ready for use.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-9-5.
Figure 4-9-5 Set up ToS Precedence Mapping page screenshot
Description
Select the QCL ID to which this QCE applies.
Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
147