Mac Address Table Command - Interlogix IFS NS3601-24P User Manual

Parameters:
<port_list>: Port list or 'all', default: All ports
<command> : The command parameter takes the following values:
: Clear port statistics
clear
: Show packet statistics
packets
: Show byte statistics
bytes
: Show error statistics
errors
: Show discard statistics
discards
: Show filtered statistics
filtered
: Show low priority statistics
low
: Show normal priority statistics
normal
: Show medium priority statistics
medium
: Show high priority statistics
high
(default: Show all port statistics)
: Show ports, which are up
up
: Show ports, which are down
down
(default: Show all ports)
Port VeriPHY
Description:
Run cable diagnostics.
Syntax:
Port VeriPHY [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports

MAC Address Table Command

MAC Configuration
Description:
Show MAC address table configuration.
Syntax:
MAC Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show Mac address state
SWITCH/>mac configuration
MAC Configuration:
==================
MAC Address : 00-30-4f-24-04-d1
MAC Age Time: 300
Port Learning
---- --------
1 Auto
2 Auto
3 Auto
4 Auto
5 Auto
6 Auto
7 Auto
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
281