Telnet Login - Interlogix IFS NS3601-24P User Manual

4. Repeat Step 1 to check if the IP address is changed.
If the IP address is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access
the Web interface of IFS Managed Switch through the new IP address.
If you do not familiar with console command or the related parameter, enter "help" anytime in
console to get the help description.
You can change these settings, if desired, after you log on. This management method is often preferred because you can remain
connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port, regardless of the
interface through which the associated action was initiated. A Macintosh or PC attachment can use any terminal-emulation program
for connecting to the terminal serial port. A workstation attachment under UNIX can use an emulator such as TIP

Telnet Login

The Managed Switch also supports telnet for remote management. The switch asks for user name and password for remote login
when using telnet, please use "admin" for username & password.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 5-3 Set IP address screen
265