Stp Port Mode; Stp Port Edge; Stp Port Autoedge - Interlogix IFS NS3601-24P User Manual

STP Port Mode

Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
: Enable MSTP protocol
Enable
: Disable MSTP protocol
Disable
Default:
Enable
Example:
Disable STP function on port1
SWITCH/>stp port mode 1 disable

STP Port Edge

Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Configure MSTP adminEdge to Edge
Enable
: Configure MSTP adminEdge to Non-edge
Disable
Default:
Enable
Example:
Disable STP edge function on port1
SWITCH/>stp port edge 1 disable

STP Port AutoEdge

Description:
Set or show the STP autoEdge port parameter.
Syntax:
STP Port AutoEdge [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Enable MSTP autoEdge
Enable
: Disable MSTP autoEdge
Disable
Default:
enable
Example:
Disable STP edge function on port1
User's Manual of NS3601-24P/4S Series
341