Smtp Configure - Interlogix IFS NS3601-24P User Manual

SMTP Configure

This page facilitates a SMTP Configure the switch. The SMTP Configure screen is shown
The page includes the following fields:
Object
• SMTP Mode
• SMTP Server
• SMTP Port
• SMTP Authentication
• Authentication User
Name
• Authentication
Password
• E-mail From
• E-mail Subject
• E-mail 1 To
• E-mail 2 To
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure 4-2-17 SMTP Configuration page screenshot
Description
Controls whether SMTP is enabled on this switch.
Type the SMTP server name or the IP address of the SMTP server.
Set port number of SMTP service.
Controls whether SMTP authentication is enabled If authentication is required
when an e-mail is sent.
Type the user name for the SMTP server if Authentication is Enable.
Type the password for the SMTP server if Authentication is Enable.
Type the sender's E-mail address. This address is used for reply e-mails.
Type the subject/title of the e-mail.
Type the receiver's e-mail address.
Figure
60
4-2-17.