Set up VLAN Tag Priority Mapping
Set up the traffic class mapping to the User Priority value (3 bits) when receiving VLAN tagged packets.
The Set up VLAN Tag Priority Mapping screen is shown
The page includes the following fields:
Object
•
QCL ID
•
VLAN Priority Class
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
The QCL configuration wizard is finished, and the new configuration is ready for use.
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
Figure
Figure 4-9-6 Set up VLAN Tag Priority Mapping page screenshot
Description
Select the QCL ID to which this QCE applies.
Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
4-9-6.
148